Patco angle grinders and sanders are rugged, powerful and designed to reach those hard to reach areas. These pneumatic angle grinders have one of the smallest angle heads in the industry. The powerful .7 h.p. motor means the operator still has the power to get the job done. These grinders and sanders are available in a variety of spindle sizes 1/4"-20, 3/8"-24 and 5/8"-11. The new three piece collet design now accepts a variety of double angle collets. The GA-11 series grinder has a wick lubricating system and is excellent for those jobs that require a heavy duty right angle grinder.
GA-11625 / GA-11650 4" & 5" Right angle grinders
| Model # | H.P. | RPM | Throttle | Spindle | Wheel | O.A.L. | Net Wt | Housing | Air let |
|---|---|---|---|---|---|---|---|---|---|
| GA-11625 | .9 | 11,000 | Safety | 5/8"-11
3/4" Long |
5" | 7 1/2" | 4 3/4 lbs. | Steel | 1/4"NPT |
| GA-11625A | 4 lbs. | Aluminum | |||||||
| GA-11625-3/8 | .9 | 11,000 | Safety | 3/8"-24 | 4" Type 27 | 7 1/2" | 4 3/4 lbs. | Steel | 1/4"NPT |
| GA-11625A-3/8 | 1" Long | 4 lbs. | Aluminum | ||||||
| GA-11650 | .9 | 11,000 | Safety Lock-off | 5/8"-11
3/4" Long |
5" | 7 3/4" | 5 lbs. | Steel | 1/4"NPT |
| GA-11650A | 4 1/4 lbs. | Aluminum | |||||||
| GA-11650-3/8 | .9 | 11,000 | Safety Lock-off | 3/8"-24 | 4" Type 27 | 7 3/4" | 5 lbs. | Steel | 1/4"NPT |
| GA-11650A-3/8 | 1"Long | 4 lbs. | Aluminum |
* IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory.
Never mount bonded grinding wheels. Always wear eye, face and body protection.
*Always use required wheel guard. Never remove a guard that is specified for a tool.
*Use only reinforced Type 27 or Type 1 wheels. 4" or 5"dia. x 1/4"max width, 3/8"or 5/8" center hole depending on the spindle. Specify Type 1 wheel by using -1 suffix (GA-11625 -3/8 -1) when ordering. Wheels not included.
*G-4001 motor tune-up kit
GA-1340 / GA-1350 Type 27 Right angle grinders
(Cross reference CP-3040-LABTIM / CP-3040-GABTIM)
| Model # | H.P. | RPM | Throttle | Spindle | Wheel | O.A.L. | Net Wt | Housing | Air let |
|---|---|---|---|---|---|---|---|---|---|
| GA-1340 | .7 | 13,500 | Safety | 3/8"-24 | 4" Type 27 | 8" | 3 1/4 lbs. | Steel | 1/4"NPT |
| 3/4"Long | |||||||||
| GA-1340A | .7 | 13,500 | Safety | 3/8"-24 | 4" Type 27 | 8" | 2 1/2 lbs. | Aluminum | 1/4"NPT |
| 3/4"Long | |||||||||
| GA-1350 | .7 | 13,500 | Safety Lock-off | 3/8"-24 | 4" Type 27 | 8 1/4" | 3 1/2 lbs. | Steel | 1/4"NPT |
| 3/4"Long | |||||||||
| GA-1350A | .7 | 13,500 | Safety Lock-off | 3/8"-24 | 4" Type 27 | 8 1/4" | 2 3/4 lbs. | Aluminum | 1/4"NPT |
| 3/4"Long |
* IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory.
Never mount bonded grinding wheels. Always wear eye, face and body protection.
*Always use required wheel guard. Never remove a guard that is specified for a tool.
*Available in 3" wheel capacity. Add -3 suffix (GA-1340-3) when ordering.
*Use only reinforced Type 27 wheels. 4" or 3"dia. x 1/4"max width, 3/8"center hole. Wheels not included.
*GA-3005 tune-up kit
GA-1340-1 / GA-1350-1 Type 1 Right angle grinders
(Cross reference CP-3040-LABTIM / CP-3040-GABTIM)
| Model # | H.P. | RPM | Throttle | Spindle | Wheel | O.A.L. | Net Wt | Housing | Air let |
|---|---|---|---|---|---|---|---|---|---|
| GA-1340-1 | .7 | 15,500 | Safety | 3/8"-24 | 4" Type 1 | 8" | 3 1/4 lbs. | Steel | 1/4"NPT |
| 1"Long | |||||||||
| GA-1340A-1 | .7 | 15,500 | Safety | 3/8"-24 | 4" Type 1 | 8" | 2 1/2 lbs. | Aluminum | 1/4"NPT |
| 1"Long | |||||||||
| GA-1350-1 | .7 | 15,500 | Safety Lock-off | 3/8"-24 | 4" Type 1 | 8 1/4" | 3 1/2 lbs. | Steel | 1/4"NPT |
| 1"Long | |||||||||
| GA-1350A-1 | .7 | 15,500 | Safety Lock-off | 3/8"-24 | 4" Type 1 | 8 1/4" | 3/4 lbs. | Aluminum | 1/4"NPT |
| 1"Long |
* IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory.
Never mount bonded grinding wheels. Always wear eye, face and body protection.
*Always use required wheel guard. Never remove a guard that is specified for a tool.
*Available in 3" wheel capacity. Add -3 suffix (GA-1340-13) when ordering.
*Use only reinforced Type 1 wheels. 4" or 3"dia. x 1/4"max width, 3/8"center hole. Wheels not included.
*GA-3005 tune-up kit
GAL-1340 / GAL-1350 Type 27 Extended right angle grinders
(Cross reference CP-3040-LASTIM / CP-3040-GASTIM)
| Model # | H.P. | RPM | Throttle | Spindle | Wheel | O.A.L. | Net Wt | Housing | Air let |
|---|---|---|---|---|---|---|---|---|---|
| GAL-1340 | .7 | 13,500 | Safety | 3/8"-24 | 4" Type 27 | 10" | 3 1/2 lbs. | Steel | 1/4"NPT |
| 3/4"Long | |||||||||
| GAL-1340A | .7 | 13,500 | Safety | 3/8"-24 | 4" Type 27 | 10" | 2 3/4 lbs. | Aluminum | 1/4"NPT |
| 3/4"Long | |||||||||
| GAL-1350 | .7 | 13,500 | Safety Lock-off | 3/8"-24 | 4" Type 27 | 10 1/4" | 3 3/4 lbs. | Steel | 1/4"NPT |
| 3/4"Long | |||||||||
| GAL-1350A | .7 | 13,500 | Safety Lock-off | 3/8"-24 | 4" Type 27 | 10 1/4" | 3 lbs. | Aluminum | 1/4"NPT |
| 3/4"Long |
* IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory.
Never mount bonded grinding wheels. Always wear eye, face and body protection.
*Always use required wheel guard. Never remove a guard that is specified for a tool.
*Available in 3" wheel capacity. Add -3 suffix (GAL-1340-3) when ordering.
*Use only reinforced Type 27 wheels. 4" or 3"dia. x 1/4"max width, 3/8"center hole. Wheels not included.
*GA-3820 tune-up kit
GAL-1340-1 / GAL-1350-1 Type 1 Right angle grinders
(Cross reference CP-3040-LASTIM / CP-3040-GASTIM)
| Model # | H.P. | RPM | Throttle | Spindle | Wheel | O.A.L. | Net Wt | Housing | Air let |
|---|---|---|---|---|---|---|---|---|---|
| GAL-1340-1 | .7 | 15,500 | Safety | 3/8"-24 | 4" Type 1 | 10" | 3 1/2 lbs. | Steel | 1/4"NPT |
| 1"Long | |||||||||
| GAL-1340A-1 | .7 | 15,500 | Safety | 3/8"-24 | 4" Type 1 | 10" | 2 3/4 lbs. | Aluminum | 1/4"NPT |
| 1"Long | |||||||||
| GAL-1350-1 | .7 | 15,500 | Safety Lock-off | 3/8"-24 | 4" Type 1 | 10 1/4" | 3 3/4 lbs. | Steel | 1/4"NPT |
| 1"Long | |||||||||
| GAL-1350A-1 | .7 | 15,500 | Safety Lock-off | 3/8"-24 | 4" Type 1 | 10 1/4" | 3 lbs. | Aluminum | 1/4"NPT |
| 1"Long |
* IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory.
Never mount bonded grinding wheels. Always wear eye, face and body protection.
*Always use required wheel guard. Never remove a guard that is specified for a tool.
*Available in 3" wheel capacity. Add -3 suffix (GA-1340-1-3) when ordering.
*Use only reinforced Type 1 wheels. 4" or 3"dia. x 1/4"max width, 3/8"center hole. Wheels not included.
*GA-3820 tune-up kit
GA-1340-C / GA-1350-C Collet style Right angle grinders
(Cross reference CP-3040-LABCID / CP-3040-GABCID)
| Model # | H.P. | RPM | Throttle | Spindle | O.A.L. | Net Wt | Housing | Air let |
|---|---|---|---|---|---|---|---|---|
| GA-1340-C | .7 | 13,500 | Safety | 1/4" STD | 8" | 2 3/4 lbs. | Steel | 1/4"NPT |
| GA-1340A-C | .7 | 13,500 | Safety | 1/4" STD | 8" | 2 lbs. | Aluminum | 1/4"NPT |
| GA-1350-C | .7 | 13,500 | Safety Lock-off | 1/4" STD | 8 1/4" | 3 lbs. | Steel | 1/4"NPT |
| GA-1350AC | .7 | 13,500 | Safety Lock-off | 1/4" STD | 8 1/4" | 2 1/4 lbs. | Aluminum | 1/4"NPT |
*Specify collet insert if other than standard 1/4" double angle collet. 1/8", 3/16" -3/8", 23/64"
*GA-3005 tune-up kit
GAL-1340-C / GAL-1350-C Collet style Extended Right angle grinders
(Cross reference CP-3040-LASCID / CP-3040-GASCID)
| Model # | H.P. | RPM | Throttle | Spindle | O.A.L. | Net Wt | Housing | Air let |
|---|---|---|---|---|---|---|---|---|
| GAL-1340-C | .7 | 13,500 | Safety | 1/4" STD | 10" | 3 1/4 lbs. | Steel | 1/4"NPT |
| GAL-1340A-C | .7 | 13,500 | Safety | 1/4" STD | 10" | 2 1/4 lbs. | Aluminum | 1/4"NPT |
| GAL-1350-C | .7 | 13,500 | Safety Lock-off | 1/4" STD | 10 1/4" | 3 lbs. | Steel | 1/4"NPT |
| GAL-1350A-C | .7 | 13,500 | Safety Lock-off | 1/4" STD | 10 1/4" | 2 1/4 lbs. | Aluminum | 1/4"NPT |
*Specify collet insert if other than standard 1/4"double angle collet. 1/8", 3/16", 3/8", 23/64"
*GA-3820 tune-up kit
GS-1340-3 / GS-1350-3 / GSL-1340-3 / GSL-1350-3 Right angle sanders
(Cross reference CP-3040 )
| Model # | H.P. | RPM | Throttle | Spindle | Back-up pad | O.A.L. | Net Wt | Housing | Air let |
|---|---|---|---|---|---|---|---|---|---|
| GS-1340-3 | .7 | 12,000 | Safety | 1/4"-20 | 3" | 8" | 3 lbs. | Steel | 1/4"NPT |
| GS-1340A-3 | 1/2"Long | 2 1/4" lbs. | Aluminum | ||||||
| GSL-1340-3 | .7 | 12,000 | Safety | 1/4"-20 | 3" | 10" | 3 1/2 lbs. | Steel | 1/4"NPT |
| GSL-1340A-3 | 1/2"Long | 2 3/4" lbs. | Aluminum | ||||||
| GS-1350-3 | .7 | 12,000 | Safety Lock-off | 1/4"-20 | 3" | 8 1/4" | 3 1/4 lbs. | Steel | 1/4"NPT |
| GS-1350A-3 | 1/2"Long | 2 1/2 lbs | Aluminum | ||||||
| GSL-1350-3 | .7 | 12,000 | Safety Lock-off | 1/4"-20 | 3" | 10 1/4" | 3 3/4 lbs. | Steel | 1/4"NPT |
| GSL-1350A-3 | 1/2"Long | 3 lbs. | Aluminum |
* IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory.
*Always wear eye, face and body protection.
*GA-3005 tune-up kit for GS - tools
*GA-3820 tune-up kit for GSL - tools
