Die Grinders

G-3507 Palm Grinder (Cross Reference CP-9107)

The G-3507 series air die grinders are powered with a rugged 1/3 HP motor; steel motor housing, and runs at a speed of 35,000 RPM. The compact design allows for work in smaller spaces where a larger grinder may not be ideal. The standard G-3507 offers a 2-piece ¼" collet system, but 4 piece collet systems are also an option on this versatile pneumatic die grinder.

Please click on model number to view Part Prints

G-1340 Die Grinders (Cross Reference CP-9113)

PATCO G-1340 series die grinders are equipped with a rugged 1 HP motor that is offered in a 15,000, 18,000, or 25,000 RPM model. Its steel motor housing is made to withstand even the most rigorous work conditions over long periods of time. The housing is also available in a lightweight aluminum. In addition this high quality air tool is outfitted with a highly accurate ¼" double angle collet. The motor parts are interchangeable across both the G-1340 and G-1350 lines, as well as with CP-9113/CP-9113G grinders, making it far better than anything available at harbor freight.

Please click on model number to view Part Prints

RE-3175 Rear Exhaust Die Grinder

The RE-3175 Rear Exhaust Die Grinder comes standard with a directional exhaust deflector.  It comes equipped with our rugged 1 HP motor giving it the power and versatility you need. Available in a steel or aluminum housing, the RE-3175 has the durability of our standard die grinders as well as the capability to direct the exhaust through the rear of the tool. Similar but far superior to Cleco, Henry tool, Top Cat, Dynabrade, and any import you will find at Harbor Freight.

Please click on model number to view Part Prints

GR-2510 Router

PATCO GR-2510 25,000 RPM routers are ideal for a wide range of applications including cutting wood, trimming and cutting plastics, trimming flash from injected molding parts, cutting window openings, and various other uses.  Each tool is equipped with a rugged 1 HP motor interchangeable across both the G-1340 and G-1350 lines, as well as with CP-9113/CP-9113G grinders, making its versatility unmatched. Its steel motor housing is made to withstand even the most rigorous work conditions over long periods of time. The housing is also available in a lightweight aluminum. This tool is outfitted with a double angle collet for extreme accuracy. In addition a wide range of router guides can be purchased to better fit your cutting needs.

Please click on model number to view Part Prints

GR-1810 Router

PATCO GR-1810 18,000 RPM routers are ideal for a wide range of applications including cutting wood, trimming and cutting plastics, trimming flash from injected molding parts, cutting window openings, and various other uses. Each industrial power tool is equipped with a rugged 1 HP motor interchangeable across both the G-1340 and G-1350 lines, as well as with CP-9113/CP-9113G grinders, making its versatility unmatched. Its steel motor housing is made to withstand even the most rigorous work conditions over long periods of time. The housing is also available in a lightweight aluminum. This tool is outfitted with a double angle collet for extreme accuracy. In addition a wide range of router guides can be purchased to better fit your cutting needs.

Please click on model number to view Part Prints

GE-1340-C Extended Die Grinder / Heavy Duty Ext Die Grinder (Cross Reference CP-9113ES)

The extension on our GE-1340-C makes it ideal for working inside of deep crevices or other recessed areas.  In addition the extended air tool is outfitted with an adjustable side exhaust and a highly accurate double angle collet. The GE-1340-C is equipped with our rugged 1HP motor making all of the motor parts interchangeable with both the G-1340 and G-1350 lines, as well as with the CP-9113ES.

GE-1340-C-HD Series

Our GE-1340-C-HD extended heavy duty die grinders offer the same capabilities as our GE-1340-C series, but are equipped with a heavy duty spindle, shank, bearings and extended housing that increase the tools durability and performance. At 1 HP and 25,000 RPM this die grinder offers enough power and length to work effectively in the hard-to-reach areas. The housing is also available in a lightweight aluminum and 18,000 RPM.

Please click on model number to view Part Prints

GE-1350-C Extended Die Grinder / Heavy Duty Ext Die Grinder (Cross Reference CP-9113GES)

Our GE-1350-C extended die grinders offer the same capabilities as our GE-1340-C series. This master extended pneumatic tool is equipped with a steel motor housing and the added feature of our unique safety lock-off lever system. These extended die grinders are made to withstand even the most rigorous work conditions over long periods of time. The housing is also available in a lightweight aluminum.  At 1 HP and 25,000 RPM this die grinder offers enough power and length to work effectively in the hard-to-reach areas. This air tool is also offered at 18,000 RPM.

GE-1350-C-HD Series

Our GE-1350-C-HD extended heavy duty die grinders offer the same capabilities as our GE-1350-C series, but are equipped with a heavy duty spindle shank, bearings and extended housing that increase the tools durability and performance. This air grinder offers our durable safety lock-off lever system (differs from the 1340 body lever style) on either a steel or aluminum housing. At 1 HP and 25,000 RPM this die grinder offers enough power and length to work effectively in the hard-to-reach areas.

Please click on model number to view Part Prints

GE-1340-W Extended Wheel Grinder (Cross Reference CP-3040-LANHUT)

Patco GE-1340-W 18,000 RPM Extended Wheel Grinders with interchangeable 2", 3" and 4" wheel guards and side exhaust system are ideal tools for weld smoothing, casting clean up, and burr removal in fabrication shops, die shops, shipyards, power plants, and refineries.  Each tool is equipped with a rugged 1 HP motor interchangeable across both the G-1340 and G-1350 lines, as well as with CP-9113/CP-9113G grinders, making its versatility unmatched. Its steel motor housing is made to withstand even the most rigorous work conditions over long periods of time. The housing is also available in a lightweight aluminum making it a high quality aluminum pneumatic tool.

Please click on model number to view Part Prints

GE-1350-W Extended Wheel Grinder (Cross Reference CP-3040-GANHUT)

Patco GE-1350-W 18,000 RPM Extended Wheel Grinders with interchangeable 2”, 3” and 4” wheel guards and side exhaust system are ideal tools for weld smoothing, casting clean up, and burr removal in fabrication shops, die shops, shipyards, power plants, and refineries. Each tool is equipped with a rugged 1 HP motor interchangeable across both the G-1340 and G-1350 lines, as well as with CP-9113/CP-9113G grinders, making its versatility unmatched. Its steel motor housing with a safety lock-off lever system (differs from the 1340 body lever style) is made to withstand even the most rigorous work conditions over long periods of time. The housing is also available in a lightweight aluminum for a lighter feel.

Please click on model number to view Part Prints

GE-1340-20 Extended Cone or Plug Wheel Grinder

Patco GE-1340-20 20,000 RPM Cone and Plug Grinders with a 3/8-24 spindle are ideal tools for weld smoothing, casting clean up, and burr removal in fabrication shops, die shops, shipyards, power plants, and refineries. Each master pneumatic tool is equipped with a rugged 1 HP motor interchangeable across both the G-1340 and G-1350 lines, as well as with CP-9113/CP-9113G grinders, making its versatility unmatched. Its steel motor housing is made to withstand even the most rigorous work conditions over long periods of time. The housing is also available in a lightweight aluminum.

Please click on model number to view Part Prints

GE-1350-20 Extended Cone or Plug Wheel Grinder

Patco GE-1350-20 20,000 RPM Cone and Plug Grinders with a 3/8-24 spindle are ideal tools for weld smoothing, casting clean up, and burr removal in fabrication shops, die shops, shipyards, power plants, and refineries. Each extended air tool is equipped with a rugged 1 HP motor interchangeable across both the G-1340 and G-1350 lines, as well as with CP-9113/CP-9113G grinders, making its versatility unmatched. Its steel motor housing with a safety lock-off lever system (differs from the 1340 body lever style) is made to withstand even the most rigorous work conditions over long periods of time. The housing is also available in a lightweight aluminum.

Please click on model number to view Part Prints

G-1350-1 Cut-Off Wheel Tools

Patco G-1350-1 Cutoff wheel tool incorporates our durability and reliability of the G-1340 and adds cut off wheel capabilities. Available with both a 3" and 4" wheel guard to fit a variety of your cutting needs. Its steel motor housing with a safety lock-off lever system (differs from the 1340 body lever style) is made to withstand even the most rigorous work conditions over long periods of time. The housing is also available in a lightweight aluminum. Equipped with the same rugged motor as our other 1 HP die grinders making all of the pneumatic motor tool parts interchangeable with both the G-1340 and G-1350 pneumatic tool lines.