American-MadeScalers & Hammers
Patco has three models of weld flux chisel and needle scalers. Patco scalers are made in the USA with high-quality hardened components. These tools are excellent for removing weld spatter, rust, cement and other debris from a variety of surfaces.
Patco riveters and air hammers offer the power and control needed to uniformly drive rivets used in aircraft and other assembly operations. This versatile tool can also be used for chipping, scraping, driving and peening applications. Manufactured using hardened steel piston and cylinder for maximum durability, these tools come in a range of barrel bore and stoke lengths and have a precision valve designed for slow heavy blows necessary to drive and hammer.
P1-B Series
P-182 Series
456 Series
Rivet Shank Hammers
P1-B Series (Parts Interchangeable with CP-9356 or Cleco B1 Model Tools)
P1-B-L
Patco P1-B-L is a heavy-duty scaler used for removing weld splatter, rust, paint, and other debris from various surfaces in hard to reach places. This scaler comes equipped with a replaceable tool nose and is available with a needle attachment (see P1-B-LN). The P1-B-L is used in a variety of fields including construction, fabrication, and refineries.
P1-B-LN
Patco P1-B-LN scalers offer the same capabilities and durability as the P1-B-L, but come equipped with a needle attachment. The P1-B-LN has a round tube end and removable needle attachment that comes with 5" hardened alloy needles, but 7" needles are also available. The P1-B-LN is used in a variety of fields including construction, fabrication, and refineries.
P1-B-P
Patco P1-B-P scalers offer the same capabilities and durability as the P1-B-L, but come equipped with a push-to-start handle, excellent for use in vertical positions and hard to reach areas. The P1-B-P push throttle scaler is used in a variety of fields including construction, fabrication, and refineries.
P1-B-PN
Patco P1-B-PN scalers offer the same capabilities and durability as the P1-B-P, but come equipped with a 5" or 7" needle attachment. The P1-B-PN has a round tube end and removable needle attachment, which allows the tool to be used as a P1-B-P chisel scaler. 5" or 7" hardened alloy needles are standard. The P1-B-PN is used in a variety of fields including construction, fabrication, and refineries.
| Model # | Blows/min | Throttle | Stroke | O.A.L. | Weight | Bore | Air inlet |
|---|---|---|---|---|---|---|---|
| P1-B-L | 4,600 | Lever | 1 1/8" | 9 1/2" | 4 lbs. | 1" | 3/8" |
| P1-B-LN | 4,600 | Lever | 1 1/8" | 14" | 6 lbs. | 1" | 3/8" |
| P1-B-P | 4,600 | Push | 1 1/8" | 10 1/2" | 6 1/2 lbs. | 1" | 1/4" |
| Description | Width | 7" | 12" | 18" |
|---|---|---|---|---|
| Blank | 5342 | 5342-12 | 5342-18 | |
| Flat chisel | 3/4" | 5343 | 5343-12 | 5343-18 |
| Scaling chisel | 1 3/8" | 5344 | 5344-12 | 5344-18 |
| Angle chisel | 1 3/8" | 5345 | 5345-12 | 5345-18 |
| Wide scraper | 2" | 5346 | 5346-12 | 5346-18 |
| Wide scraper | 3" | 5347 | ||
| Diamond point | 1/4" | 5348 | ||
| Round nose | 5/16" | 5349 | ||
| Cape chisel | 5/16" | 5350 | ||
| Panel cutter | 5351 |
P-182 Series (Parts interchangeable with IR-182 model tools)
P-182-L
Patco P-182-L scaler is an excellent tool for knocking sand from castings, trimming flash, chipping weld splatter, cutting metal, and removing paint and gaskets. A needle attachment is an optional accessory (see P-182-LN). The P-182-L is used in a variety of fields including construction, fabrication, and refineries.
P-182-LN
Patco P-182-LN scalers offer the same capabilities and durability as the P-182-L, but come equipped with a 5” or 7” needle attachment. The P-182-LN has a round tube end and removable needle attachment, which allows the tool to be reverted back to a chisel scaler. 5” or 7” hardened alloy needles are standard. The P-182-LN is used in a variety of fields including construction, fabrication, and refineries.
P-182-P
Patco P-182-P scalers offer the same capabilities and durability as the P-182-L, but come equipped with a push-to-start handle, excellent for use in vertical positions and hard to reach areas. The P1-B-P is used in a variety of fields including construction, fabrication, and refineries.
P-182-PN
Patco P-182-PN scalers offer the same capabilities and durability as the P-182-P, but come equipped with a 5” or 7” needle attachment. The P-182-PN has a round tube end and removable needle attachment, which allows the tool to be reverted back to a chisel scaler. 5” or 7” hardened alloy needles are standard. The P-182-PN is used in a variety of fields including construction, fabrication, and refineries.
| Model # | Blows/min | Throttle | Stroke | O.A.L. | Weight | Bore | Air inlet |
|---|---|---|---|---|---|---|---|
| P-182-L | 4,000 | Lever | 1 1/16" | 9" | 4 lbs | 15/16" | 1/4" |
| P-182-LN | 4,000 | Lever | 1 1/16" | 15" | 6 1/4 lbs | 15/16" | 1/4" |
| P-182-P | 4,000 | Push | 1 1/16" | 10 1/8" | 3 3/4 lbs | 15/16" | 1/4" |
| P1-B-PN | 4,000 | Push | 1 1/16" | 16 1/8" | 6 lbs | 15/16" | 1/4" |
Chisels for P-182-L and P-182-P
| Description | Width | 7" | 12" | 18" |
|---|---|---|---|---|
| Blank | 5331 | 5331-12 | 5331-18 | |
| Flat chisel | 3/4" | 5332 | 5332-12 | 5332-18 |
| Scaling chisel | 1 3/8" | 5333 | 5333-12 | 5333-12 |
| Angle chisel | 1 3/8" | 5334 | 5334-12 | 5334-18 |
| Wide scraper | 2" | 5335 | ||
| Wide scraper | 3" | 5336 | ||
| Diamond point | 1/4" | 5337 | ||
| Round nose | 5/16" | 5338 | ||
| Cape chisel | 5/16" | 5339 | ||
| Panel cutter | 5340 | |||
| Heavy blade flat | 1 1/4" | N/A |
456 Series (Parts interchangeable with CP-0456-LESAR, CP-0456-LASAN and CP-0456-BESAR model tools)
456-L
Patco 456-L scalers handle a variety of different applications including knocking sand and ceramic from castings, removing weld splatter, removing paint, and removing gaskets. The tool is an aggressive heavy-duty scaler with parts that are interchangeable with the CP-0456 model tools.
456-LN
Patco 456-LN scalers offer the same aggressive heavy-duty capabilities as the 456-L, but come equipped with a 5” or 7” needle attachment. The 456-LN has a removable needle attachment, which allows the tool to be reverted back to a chisel scaler. 5” or 7” hardened alloy needles are standard.
456-BL
Patco 456-BL scalers offer the same aggressive heavy-duty capabilities as the 456-L, but come equipped with a uniquely designed backhead which allows the operator to pull back on the lever and blow the work surface clear of debris.
Please click on model number to view Part Prints
| Model # | Blows/min | Throttle | Stroke | O.A.L. | Weight | Bore | Air inlet |
|---|---|---|---|---|---|---|---|
| 456-L | 4,300 | Lever | 1" | 8 5/8" | 3 lbs. | 15/16" | 1/4" |
| 456-LN | 4,300 | Lever | 1" | 15 3/8" | 5 1/2 lbs. | 15/16" | 1/4" |
| 456-BL | 4,300 | Lever Blower Type | 1" | 9 7/8" | 4 1/4 lbs. | 15/16" | 1/4" |
| 456-BLN | 4,300 | Lever Blower Type | 1" | 16 5/8" | 6 3/4 lbs. | 15/16" | 1/4" |
| Description | Width | 7" | 12" | 18" |
|---|---|---|---|---|
| Blank | 5320 | 5320-12 | 5320-18 | |
| Flat chisel | 3/4" | 5321 | 5321-12 | 5321-18 |
| Scaling chisel | 1 3/8" | 5322 | 5322-12 | 5322-18 |
| Angle chisel | 1 3/8" | 5323 | 5323-12 | 5323-18 |
| Wide scraper | 2" | 5324 | ||
| Wide scraper | 3" | 5325 | ||
| Diamond point | 1/4" | 5326 | ||
| Round nose | 5/16" | 5327 | ||
| Cape chisel | 5/16" | 5328 | ||
| Panel cutter | 5329 | |||
| Heavy blade flat | 1 1/4" | 5330 | 5330-12 |
P-3X and P-4X .401 Shank Rivet Hammers (Cross Reference CP-4444-RUSAB, CP-4444-RUTAB)
| Model # | Shank | Blows/min. | Bore & Stroke | O.A.L. | Weight | Air inlet |
|---|---|---|---|---|---|---|
| P-3X | .401 | 2,160 | 1/2 x 2 7/8" | 7 5/16" | 2 1/4 lbs. | 1/4" |
| P-4X | .401 | 1,740 | 1/2 x 3 7/8" | 8 5/16" | 2 3/4 lbs. | 1/4" |
P-5X and P-7X .498 Shank Rivet Hammers (Cross Reference CP-4447-RUSAB, CP-4447-RUVAB)
| Model # | Shank | Blows/min. | Bore & Stroke | O.A.L. | Weight | Air inlet |
|---|---|---|---|---|---|---|
| P-5X | .498 | 1,560 | 3/4 x 2 11/16" | 8 15/16" | 4 3/4 lbs. | 1/4" |
| P-7X | .498 | 900 | 3/4 x 5 13/16" | 11 15/16" | 6 lbs. | 1/4" |