Scalers and Hammers Products
| Model # | Shank | Blows/min. | Bore & Stroke | O.A.L. | Weight | Air inlet |
|---|---|---|---|---|---|---|
| P-5X | .498 | 1,560 | 3/4 x 2 11/16" | 8 15/16" | 4 3/4 lbs. | 1/4" |
| P-7X | .498 | 900 | 3/4 x 5 13/16" | 11 15/16" | 6 lbs. | 1/4" |
| Model # | Shank | Blows/min. | Bore & Stroke | O.A.L. | Weight | Air inlet |
|---|---|---|---|---|---|---|
| P-3X | .401 | 2,160 | 1/2 x 2 7/8" | 7 5/16" | 2 1/4 lbs. | 1/4" |
| P-4X | .401 | 1,740 | 1/2 x 3 7/8" | 8 5/16" | 2 3/4 lbs. | 1/4" |
Patco 456-L scalers handle a variety of different applications including knocking sand and ceramic from castings, removing weld splatter, removing paint, and removing gaskets. The tool is an aggressive heavy-duty scaler with parts that are interchangeable with the CP-0456 model tools.
Patco 456-LN scalers offer the same aggressive heavy-duty capabilities as the 456-L, but come equipped with a 5” or 7” needle attachment. The 456-LN has a removable needle attachment, which allows the tool to be reverted back to a chisel scaler. 5” or 7” hardened alloy needles are standard.
Patco 456-BL scalers offer the same aggressive heavy-duty capabilities as the 456-L, but come equipped with a uniquely designed backhead which allows the operator to pull back on the lever and blow the work surface clear of debris.
Please click on model number to view Part Prints
| Model # | Blows/min | Throttle | Stroke | O.A.L. | Weight | Bore | Air inlet |
|---|---|---|---|---|---|---|---|
| 456-L | 4,300 | Lever | 1" | 8 5/8" | 3 lbs. | 15/16" | 1/4" |
| 456-LN | 4,300 | Lever | 1" | 15 3/8" | 5 1/2 lbs. | 15/16" | 1/4" |
| 456-BL | 4,300 | Lever Blower Type | 1" | 9 7/8" | 4 1/4 lbs. | 15/16" | 1/4" |
| 456-BLN | 4,300 | Lever Blower Type | 1" | 16 5/8" | 6 3/4 lbs. | 15/16" | 1/4" |
| Description | Width | 7" | 12" | 18" |
|---|---|---|---|---|
| Blank | 5320 | 5320-12 | 5320-18 | |
| Flat chisel | 3/4" | 5321 | 5321-12 | 5321-18 |
| Scaling chisel | 1 3/8" | 5322 | 5322-12 | 5322-18 |
| Angle chisel | 1 3/8" | 5323 | 5323-12 | 5323-18 |
| Wide scraper | 2" | 5324 | ||
| Wide scraper | 3" | 5325 | ||
| Diamond point | 1/4" | 5326 | ||
| Round nose | 5/16" | 5327 | ||
| Cape chisel | 5/16" | 5328 | ||
| Panel cutter | 5329 | |||
| Heavy blade flat | 1 1/4" | 5330 | 5330-12 |
Patco P-182-L scaler is an excellent tool for knocking sand from castings, trimming flash, chipping weld splatter, cutting metal, and removing paint and gaskets. A needle attachment is an optional accessory (see P-182-LN). The P-182-L is used in a variety of fields including construction, fabrication, and refineries.
Patco P-182-LN scalers offer the same capabilities and durability as the P-182-L, but come equipped with a 5” or 7” needle attachment. The P-182-LN has a round tube end and removable needle attachment, which allows the tool to be reverted back to a chisel scaler. 5” or 7” hardened alloy needles are standard. The P-182-LN is used in a variety of fields including construction, fabrication, and refineries.
Patco P-182-P scalers offer the same capabilities and durability as the P-182-L, but come equipped with a push-to-start handle, excellent for use in vertical positions and hard to reach areas. The P1-B-P is used in a variety of fields including construction, fabrication, and refineries.
Patco P-182-PN scalers offer the same capabilities and durability as the P-182-P, but come equipped with a 5” or 7” needle attachment. The P-182-PN has a round tube end and removable needle attachment, which allows the tool to be reverted back to a chisel scaler. 5” or 7” hardened alloy needles are standard. The P-182-PN is used in a variety of fields including construction, fabrication, and refineries.
| Model # | Blows/min | Throttle | Stroke | O.A.L. | Weight | Bore | Air inlet |
|---|---|---|---|---|---|---|---|
| P-182-L | 4,000 | Lever | 1 1/16" | 9" | 4 lbs | 15/16" | 1/4" |
| P-182-LN | 4,000 | Lever | 1 1/16" | 15" | 6 1/4 lbs | 15/16" | 1/4" |
| P-182-P | 4,000 | Push | 1 1/16" | 10 1/8" | 3 3/4 lbs | 15/16" | 1/4" |
| P1-B-PN | 4,000 | Push | 1 1/16" | 16 1/8" | 6 lbs | 15/16" | 1/4" |
Chisels for P-182-L and P-182-P
| Description | Width | 7" | 12" | 18" |
|---|---|---|---|---|
| Blank | 5331 | 5331-12 | 5331-18 | |
| Flat chisel | 3/4" | 5332 | 5332-12 | 5332-18 |
| Scaling chisel | 1 3/8" | 5333 | 5333-12 | 5333-12 |
| Angle chisel | 1 3/8" | 5334 | 5334-12 | 5334-18 |
| Wide scraper | 2" | 5335 | ||
| Wide scraper | 3" | 5336 | ||
| Diamond point | 1/4" | 5337 | ||
| Round nose | 5/16" | 5338 | ||
| Cape chisel | 5/16" | 5339 | ||
| Panel cutter | 5340 | |||
| Heavy blade flat | 1 1/4" | N/A |
Patco P1-B-L is a heavy-duty scaler used for removing weld splatter, rust, paint, and other debris from various surfaces in hard to reach places. This scaler comes equipped with a replaceable tool nose and is available with a needle attachment (see P1-B-LN). The P1-B-L is used in a variety of fields including construction, fabrication, and refineries.
Patco P1-B-LN scalers offer the same capabilities and durability as the P1-B-L, but come equipped with a needle attachment. The P1-B-LN has a round tube end and removable needle attachment that comes with 5″ hardened alloy needles, but 7″ needles are also available. The P1-B-LN is used in a variety of fields including construction, fabrication, and refineries.
Patco P1-B-P scalers offer the same capabilities and durability as the P1-B-L, but come equipped with a push-to-start handle, excellent for use in vertical positions and hard to reach areas. The P1-B-P push throttle scaler is used in a variety of fields including construction, fabrication, and refineries.
Patco P1-B-PN scalers offer the same capabilities and durability as the P1-B-P, but come equipped with a 5″ or 7″ needle attachment. The P1-B-PN has a round tube end and removable needle attachment, which allows the tool to be used as a P1-B-P chisel scaler. 5″ or 7″ hardened alloy needles are standard. The P1-B-PN is used in a variety of fields including construction, fabrication, and refineries.
| Model # | Blows/min | Throttle | Stroke | O.A.L. | Weight | Bore | Air inlet |
|---|---|---|---|---|---|---|---|
| P1-B-L | 4,600 | Lever | 1 1/8" | 9 1/2" | 4 lbs. | 1" | 3/8" |
| P1-B-LN | 4,600 | Lever | 1 1/8" | 14" | 6 lbs. | 1" | 3/8" |
| P1-B-P | 4,600 | Push | 1 1/8" | 10 1/2" | 6 1/2 lbs. | 1" | 1/4" |
| Description | Width | 7" | 12" | 18" |
|---|---|---|---|---|
| Blank | 5342 | 5342-12 | 5342-18 | |
| Flat chisel | 3/4" | 5343 | 5343-12 | 5343-18 |
| Scaling chisel | 1 3/8" | 5344 | 5344-12 | 5344-18 |
| Angle chisel | 1 3/8" | 5345 | 5345-12 | 5345-18 |
| Wide scraper | 2" | 5346 | 5346-12 | 5346-18 |
| Wide scraper | 3" | 5347 | ||
| Diamond point | 1/4" | 5348 | ||
| Round nose | 5/16" | 5349 | ||
| Cape chisel | 5/16" | 5350 | ||
| Panel cutter | 5351 |
American-Made